NORTHCUT · Chainsaw Chains
.325" Chainsaw Chains
Explore NORTHCUT chainsaw chains with a .325" pitch,
available in two drive link gauge options: 1.3 mm and
1.5 mm. These chains are intended for selected petrol
chainsaw models. Check your guide bar and chainsaw
specifications before ordering to ensure the correct fit.
Choose the Correct Drive Link Gauge
The chain pitch must match the drive sprocket and guide
bar. The drive link gauge must also match the width of
the guide bar groove.
1.3 mm Gauge
.325" / 1.3 mm
.325" Chainsaw Chain – 1.3 mm
Intended for petrol chainsaws equipped with a
standard .325" cutting system and a guide bar
with a 1.3 mm groove.
Before purchasing, check the required number of
drive links and confirm compatibility with your
chainsaw model.
1.5 mm Gauge
.325" / 1.5 mm
.325" Chainsaw Chain – 1.5 mm
Intended for petrol chainsaws equipped with a
standard .325" cutting system and a guide bar
with a 1.5 mm groove.
Confirm the guide bar specifications, required
number of drive links and manufacturer's
recommendations before selecting your chain.
Important:
1.3 mm and 1.5 mm drive link gauges are not automatically
interchangeable. The chain gauge must match the guide
bar groove.
Compatibility with Petrol Chainsaws
NORTHCUT .325" chainsaw chains are intended for selected
petrol chainsaw models equipped with a compatible cutting
system. Compatibility depends on chain pitch, drive link
gauge, number of drive links, guide bar and drive sprocket
configuration.
STIHL Petrol Chainsaws
Suitable for selected STIHL petrol chainsaw models
that use a standard .325" pitch and the corresponding
chain gauge. Check the guide bar specifications and
required number of drive links.
Husqvarna Petrol Chainsaws
Suitable for selected Husqvarna petrol chainsaw
models equipped with a standard .325" cutting system.
The chain gauge and number of drive links must match
the guide bar.
Other Petrol Chainsaw Brands
Compatibility with other brands depends on the
exact model specifications and cutting system.
Always check the manufacturer's recommendations.
Check the Specifications
Confirm the standard .325" pitch, the required
1.3 mm or 1.5 mm drive link gauge, and the number
of drive links. Do not select a chain based on
guide bar length alone.
Please note:
this category covers standard .325" pitch chains,
not .325" mini chains. Compatibility must be verified
for the exact chainsaw model.
How to Choose the Correct Chainsaw Chain
To identify a chain compatible with your equipment,
check the following technical specifications:
-
Chain pitch:
must be standard .325" and match the drive sprocket
and guide bar.
-
Drive link gauge:
choose 1.3 mm or 1.5 mm according to the width
of the guide bar groove.
-
Number of drive links:
must match the guide bar and cutting system configuration.
-
Chainsaw model:
check the manufacturer's specifications, especially
if the guide bar or drive sprocket has been replaced.
-
Exact chain type:
make sure your equipment requires standard .325"
pitch, not .325" mini.
Nominal guide bar length, expressed in centimetres or
inches, is not enough to identify the correct chain.
Two guide bars of the same length may require different
numbers of drive links.
